-
Biomaterial & Bioengineering Laboratory
Equipments

It is used to remove solvent from a sample through “evaporation under reduced pressure”. The reduced pressure in the apparatus causes the solvent (in the round bottom flask) to boil at a lower temperature than normal. By rotating the round bottom flask, it increases the liquid’s surface area and thus the rate of evaporation. The solvent vapor travels into the cooler water condenser, where it condenses and drips into a separate receiving flask. This process removes the solvent, therefore leaving a concentrated compound in the original round bottom flask.
Location : CRL 5
PIC :

An incubator shaker (also called a shaking incubator) is a laboratory device that provides controlled temperature and agitation (shaking) for samples. It’s especially useful for growing An incubator shaker (also called a shaking incubator) is a laboratory device that provides controlled temperature and agitation (shaking) for samples. It’s especially useful for growing microorganisms, cells, or for mixing reactions under consistent conditions or for mixing reactions under consistent conditions.
Location : CRL 5
PIC :

This equipment used to detect and quantify biological, chemical and physical process in samples contained in microplates. Detection methods used in this equipment are absorbance and fluorescence.
Location : CRL 5
PIC :

This equipment used to polish sample to achieve smoothness and shine.
Location : CRL 5
PIC :

This equipment use to fabricate, modify, and repair dental prosthetics like crowns, bridges, dentures, and orthodontic appliances using for research.
Location : CRL 5
PIC :

A centrifuge is a lab device used to separate substances based on their density by spinning them at high speed.
Location : CRL 5
PIC :
About Our Biomaterial & Bioengineering Laboratory
The Biomaterial & Bioengineering Laboratory is housed within the Biobahan Building. It comprises several specialized sub-laboratories, including the Characterization Laboratory, Synthesis Laboratories 1 and 2, the Cell Culture Laboratory, and the Bioengineering Laboratory. Each of these facilities is well-equipped with a range of advanced instruments dedicated to the synthesis and development of biomaterials.

This equipment used to measure size of particle in sample using laser diffraction. This equipment cannot measure sample in nanosized.
Location : CRL 5
PIC :

This pH meter is an instrument used to measure the acidity or alkalinity (basicity) of a solution.
Location : CRL 5
PIC :

This equipment used to grind sample to become small size. This equipment only can grind dry sample. Wet samples are not allowed. Our grinding balls are from stainless steel.
Location : CRL 5
PIC :

This equipment used to separate particles form different sizes.
Location : CRL 5
PIC :

This equipment used for cutting small sample such as metal, ceramics, composites and other hard sampels. Bigger samples are suitable with this equpiment.
Location : CRL 5
PIC :

This equipment used to ashing and heat treating samples.The temperature up to 1100 C.
Location : CRL 5
PIC :
Make an Appointment

Title
Title
Title
Product | Details | ||
---|---|---|---|
Partical Size Analyzer | ![]() | Seat width: 45 cm Seat depth: 40 cm Total height: 75 cm | Brand : Model : Location : Person In-Charge : Email :Contact : |
Marble Chair | Seat width: 45 cm Seat depth: 40 cm Total height: 75 cm | Maximum weight of the package: 7 kg |
About Our Biomaterial & Bioengineering Laboratory
The Biomaterial & Bioengineering Laboratory is housed within the Biobahan Building. It comprises several specialized sub-laboratories, including the Characterization Laboratory, Synthesis Laboratories 1 and 2, the Cell Culture Laboratory, and the Bioengineering Laboratory. Each of these facilities is well-equipped with a range of advanced instruments dedicated to the synthesis and development of biomaterials.
EQUIPMENTS
Partical Size Analyzer | Brand: Malvern Model: 3000 Location: CRL 5 Person In-Charge: Nurulakma Zali / Nurandlia Mohamad Koldaie Email: Contact: 04-562 2512 / 04-562 2391 | ![]() |
Gas Chromatography Mass Spectrometry | Brand : Agilent Model : 7890A/5975C Location : CRL 1 Person In-Charge : Syazwani Ismail/ Halianis Yusoff Email : Contact : 04-562 2742 / 04-562 2744 | ![]() |
Headspace Gas Chromatography-Mass Spectrometry | Brand : Agilent Model : 7697A/8890/5977B Location : CRL 1 Person In-Charge : Syazwani Ismail/ Halianis Yusoff Email : Contact : 04-562 2742 / 04-562 2744 | ![]() |
High-Performance Liquid Chromatography | Brand : Agilent Model : LC/MS APCI Location : CRL 1 Person In-Charge : Syazwani Ismail/ Halianis Yusoff Email : Contact : 04-562 2742 / 04-562 2744 | ![]() |
Liquid Chromatography Mass Spectrometry | Brand : Agilent Model : 1260 Infinity II Location : CRL 3 Person In-Charge : Nur Syazana Azizan / Zatin Era Azera Zakir Email : Contact : 04-562 2510 / 04-562 2416 | ![]() |
Liquid Chromatography-Quadrupole Time-of-Flight Mass Spectrometry | Brand : Waters Model : Xevo G3 Tof Location : CRL 1 Person In-Charge : Rafedah Abas / Nurulakma Zali Email : Contact : 04-562 2540 / 04-562 2512 | ![]() |
Capillary Electrophoresis | Brand : Agilent Model : G 7100 Location : CRL 1 Person In-Charge : Syazwani Ismail / Halianis Yusoff Email : Contact : 04-562 2540 / 04-562 2744 | ![]() |